GT 7030 Thermoform Machine
GT7030 General Specifications
- Forming area 700 x 400 mm.
- Mold forming depth 150 mm- optional (MAX) 170 mm
- Chain moving with Servo Motor
- Servo main engine 11 kw ( 31 Nm,3000 rpm )
- Servo Plug Assist Motor 7.5 kw ( 25.5 Nm, 3000 rpm ), ( with automatic lubrication)
- Unwinder (AC) motor 0.75kw ( 89 Nm, 1435 rpm )
- Cutting (AC) motor 1.5 kw ( 22 Nm , 2830 rpm )
- Waste roller ( AC)motor.0.75 kw (50 Nm ,940 rpm )
- Chain pulling engine 4 kw.( 9.40 Nm,4500 rpm ) with back and forth moving ability
- Becker Brand Vacuum Pump 1.5 kw.
- Width material Adjustment according to plate dimension
- Stainless Steel Raw Material Chain Levers with upper and lower side cooling abilities
- Chain Levers that spreading the plate automatically when machine is turned on.
- 15-Area Controlled Upper Pan Heat Controlling
- 3-Area Controlled Lower Pan Heat Controlling
- Ceramic Heaters.
- Heating pan side cowers
- Laser Sensor Sheet Hanging controller
- Machine Cams ( 10 years warranty )
- Automatic central lubrication with electric pump
- Shock Absorbers to absorb the vibrations of moving lower block
- Electronic Cutting Adjustment for Upper Mould
- Upper and lower mould (tools) return water temperature control from plc.
- Safety Valves and Indicator for Machine inflow
- Air Pressure.Forming Air pressure indicator
- Pressing Air Pressure Setting and Indicator
- Full Automatic Operation
- Heat Controlling option when machine is on stand-by position
- Motor-Driven Water Canalizing that adjusts automatically the heat difference between lower and upper moulds whit plc.
- Dropsa Brand Automatic Chain Lubrication System
- Touchscreen PLC controlling
- Heat Difference Indicator
- Water connection indicator
- Mould Vacuum system
- SMC Brand pneumatic valves
- TFT Color Touch Screen
- Turkish-English Language Option. Programming with voice
- Usb connection
- Electric board Air-Conditioner
- For chain inlet ceramic pre heaters